The Atlas Vial Baths are a new way of heating or cooling several reaction vials at the same time.
Designed to fit on standard hotplate stirrers, these Vial Baths provide good thermal contact to the
vial and therefore excellent temperature control within the reaction. Each of the Vial Bath
inserts is interchangeable within the Dry Bath Base making changing vial size quick and easy.
The exterior of the Dry Bath remains safe to touch even when the Vial Bath is hot or cold.
Vial Bath benefits
●
Wide range of volumes available: 6 x large diameter vials (40ml or 20ml), 8 x medium diameter thick wall pressurised vials (2, 3 or 5ml) or 12 x small diameter vials (8ml).
● Interchangeable design: One Atlas Dry Bath base can be used for all three Vial Bath sizes or round bottom flask inserts.
● High and low temperature: Can safely operate up to 280°C and down to -80°C.
● Safety shield: Chemist is protected from the heat by safety shield. In an emergency the dry bath can be picked up and moved.
● Rapid cooling: Safety shield sets up a natural convection airflow allowing the reaction to be cooled quickly for rapid work-up and purification.
● Sleek design: Reduces the mass of the block to be heated, improving heat-up times.
● Robust: Specifically designed for use in chemical
laboratories.
● Deep Wells: Maximised heated surface area to improve heatup time and minimise the difference between the block and reaction temperature.
● Each bath has a probe hole: Position temperature probe in close contact with the reactors.
● Fits all leading brands of hotplate: Syrris Atlas, IKA etc (fitshotplate diameter of 13.5 cm, 5 5/16”).
● Pressurised reactions supported: Wheaton V vials can be used in the medium vial bath enabling overpressurisation.
|
|
|
